Monday, April 8, 2013

production scheduling options in SAP-ERP

As I will speak on this subject at ASUG / SAPPHIRE 2013 in Orlando in May (on Wednesday the 15th), I'd figured it be worthwhile to solicitate some feedback from you on my ideas and findings.

First off: in my opinion one size does NOT fit all. When you have fabrication, processing, assembly and packaging or other steps, all in one manufacturing plant, you can employ more than one strategy. Who says it all has to be discrete production orders? If, as an example, a bottling line starts out with a blending process, then fills bottles and eventually packs the bottles into cartons, you can schedule the batch process orders for blending with a Product Wheel (I refer to Peter King's book on  'Lean for the Process Industry), run the bottling line with takt-based scheduling of a model mix and pull the finished (packed) product with a Kanban Control Cycle (which is also a scheduling method!) into the distribution center.

So what kind of scheduling methods are there in SAP-ERP? Probably more than you think. But before we list some of them, let's discuss what 'production scheduling' actually is. As is depicted on the following slide, a typical internal supply chain goes through the cycle of planning, scheduling and execution. Scheduling then, is the process of pooling the planned orders, leveling those to take out variability and noise, and eventually sequencing the orders within the available capacity.


Once that has been done, we have a feasible (or finite) schedule. So the question in my mind is: what method do we employ to take orders out of the pool, level them for even distribution and place them in a sequence so that they can be executed on time within the available capacity?

Therefore the art of scheduling lies in the ability to effectively utilize free resources to empty the pool  and fulfill the demand. Like channeling a waterfall of requirements onto value streams without having them overflow.

three dedicated lines and one that can be scheduled for various products

(...by the way... we should also pay close attention to those containers collecting the product that comes off the line... they have a maximum capacity too and cost a lot of money in form of finished product stock holdings)

So what do we have available for production scheduling in SAP-ERP? There is the traditional capacity scheduling of discrete orders with transactions CM21, CM22, CM25 and CM29. Within it, you may schedule using various strategies like setup optimization where you put orders with similar setup requirements together. Or you can use heijunka to evenly distribute and make Every Product Every Interval. Another option is to simply line up one order after another as long as there is available capacity. Good practice is to not schedule up to 100% of capacity (or even above, as many do) so that you can buffer variability (see my blogs on Factory Physics...) and that kind of thing can also be provided in the strategy.

Then there are the tools of repetitive manufacturing which provide excellent methods which allow you to adhere to lean and agile principles. When using RepMan, the MRP run generates executable Run Schedules (planned orders that you don't have to convert). That opens up a number of opportunities like takt-based scheduling which guarantees 'flow', if done right (and if you periodically balance the line)

RepMan can also combine a planned sequence with Kanban. In that case the actual Kanban withdrawals (those are actual demand) replace a planned order that was sequenced and capacity leveled.

Kanban is a scheduling method too! It is an autonomous one... and here I would like to talk about the difference between central planning and autonomous planning:

Most of us plan centrally. When the S&OP is handed over (the transfer of demand to MRP), we usually go ahead and kick off the planning, scheduling and then the exccution phases. That is central planning. And that is how the former "Deutsche Demokratische Republik" (DDR or East Germany) has done it.



The DDRs central committee (their S&OP I guess) put a plan together for anything from clothing, cars and living spaces to sausage, vegetables and flour. And sometimes there was plenty, but mostly you had long lines of hungry people in front of the butcher. This kind of thing is not really a big problem for iPhones (we still have those long lines), but when it comes to basic stuff that we need everyday, we want some insurance that we can buy that any time of the day. That's where the Keynes's market forces came in handy for us Westerners. We let our butchers decide, based on their business sense and experience, what they wanted to put on the shelves. And that, for reasons I really don't need to get into here, worked out pretty nicely.

So it is with production scheduling. Sometimes you just want to let the crew down at the work station make the decision what job they release into the cell at what time and in what sequence. They see variability first hand, timely and with their own eyes. Give them a workload for the week and have them deliver by Friday (or give them orders for a day... or for a months).

I am not saying that you should do that for your entire factory (remember... one size does NOT fit all), but there are situations and instances that are run much better if you just let it go. Others require careful central planning to be successful. The art, again..., lies in finding the right solution for the right problem.

And don't go crazy trying to find the perfect sequence! It is impossible to do, because if you only had to schedule 3 jobs on one work center, there would be 6 possibilities for a sequence (3 times 2 times 1 = 3! factotum). If you have 25 jobs to schedule a sequence for on one work center, you get 25! factotum possibilities; and that is a number if expressed in pennies it would cover the state of Texas... 6 miles high! Not even the best APO heuristics can come up with the perfect result in a plant with 5 lines and thousands of jobs.

Sometimes you just need to use common sense and be willing to try something new. Have faith in the scheduling options ERP offers and try to learn as much as you can about each strategy... And! use repetitive manufacturing! unless you make every one of your products only once and never again...


--------------------------------------------------------------------------------------------------------------------
bigbyte has put together a method to match the right scheduling method to the right production line... contact us for more information.

6 comments:

  1. You are just awesome ...keep sharing good stuff

    ReplyDelete
    Replies
    1. Hello Uwe,

      There are many blogs on this subject but the way you connect business with SAP fundamental with innovating style makes you awesome.

      I have 11 yrs exp. but last 6 months reading your blogs & ideas made me understand the beauty of SAP capabilities.

      I am proud to say that You are my mentor :-)

      Cheers
      Pawan Wadhwa

      Delete
  2. Let me share recent scheduling issue & how we handle .

    Client is forecasting (Using SOP) finished good for procure raw materials which has higher lead time but they have to wait for Sales Order to start printing process (which is customer specific) , using strategy 40 & for scheduling they do pooling to avoid change over.

    Problem-
    1) Identify of planned order source is tough - its from SO or PIR or Safety Stock to schedule- User has to peg down each planned order to check source as Production Finished good & one level below semi finished is totally based on Sales Order so forecast make planning tough for these level.
    2)Planner pool the planned order on the base of component used & it make difficult to scheduling by C041 (C041 screen doesn`t have BOM information )

    Initial solution was a custom report which show all the planned order source (MD09) & component information (Sort Stringing ) for the planned order in excel sheet. Problem with this solution was work in excel sheet & update back in SAP with each planned order . Updating daily this sheet is also tough & user are moving away from SAP & doing scheduling in excel & its Painful.

    New Solution Implemented.

    1) Used Power of MRP group to Ignore Initial for 2 weeks forecast for planning for Finished good & level below semi finished item. so planner can plan on the base of actual sales order.No Planned order created by MRP from forecast for planning period of two week- which make easier to plan.

    2)Classification of production scheduler on the base of component used in the assembly to make easier to grouping the same type planned order with using Production scheduler in C041.

    Now planner can use C041 for sorting, grouping , date change. qty change directly in SAP.

    All this ideas I learned from your blog so thanks for that.

    I know there is always a better way to do it so if you have please share.

    Cheers
    Pawan Wadhwa

    ReplyDelete
    Replies
    1. Hi Pawan
      I am sorry I can't spend more time on thinking about your problem but I have to catch a plane... and I am not sure if I completely understand your problem...

      However, from what I read into this you would be very well off using strategy 50. 50 allows you to hand the demand down through as many BoM levels as you want. Along that way statistical planned orders (you can not turn them into committed orders initially) are created which transfer demand through the BoM so that you can procure raw materials. As customer orders come in the statistical orders are replaced by executable orders and you can start the printing process. strategy 52 does it in an MTS environment while 50 does it for MTO, which should help you with the pegging and keeping the demand separate
      I hope this helps
      Uwe

      Delete
    2. Thanks Uwe,

      You are right I suggested Strategy 50 with my Initial demo but client want ATP not on PIR based so they have rejected this option. So I have to do customization of MRP group for function- Period of adjustment for planned independent requirements & assign it to Finished good & one level down semi finished good which are dependent on SO.

      Have a safe flight.

      What do you think about production scheduler field usability ?

      Cheers
      Pawan Wadhwa



      Delete

Note: Only a member of this blog may post a comment.